ITER
ITER is an international collaboration that aims to demonstrate the scientific and technological feasibility of fusion energy. ITER is using a tokamak to prove that magnetic confinement can contain and sustain a superheated plasma long enough to produce net energy. ITER is an experimental machine intended to test the physics and engineering required for future power plants.
Images
Suppliers





SupplyingPrecision Custom Components is supplying lower support components for ITER central solenoid
Announcement



- Supplying
General Atomics is providing ECH transmission line wave guide assemblies to ITER
Announcement
SupplyingSIMIC is providing the on site installation of the tokamak machine at the ITER site
Announcement
SupplyingSIMIC has worked on manufacturing 35 radial plates and 10 toroidal field (TF) coils for ITER.
Announcement
SupplyingWestinghouse will be responsible for completing the vacuum vessel for the ITER project
Announcement
RI Research Instruments
Bergisch Gladbach, North Rhine-Westphalia, GermanyCryogenic Systems & ComponentsSupplyingThe final cryopump for ITER has been successfully manufactured, factory acceptance tested, and delivered to the ITER site. All eight torus and cryostat cryopump
Announcement
RI Research Instruments
Bergisch Gladbach, North Rhine-Westphalia, GermanyCryogenic Systems & Components
SupplyingHas supplied CuCrZr to the first wall panel, upper launcher, and divertor since 2021.
Announcement


SupplyingCosylab built and support ITER's CODAC Core System, the standardized software platform that all suppliers use to develop their plant control systems.
Announcement

SupplyingSupplied the superconducting magnets necessary for plasma heating gyrotrons from THALES.

SupplyingProviding custom optical components to support optical and diagnostic subsystems.
Announcement
Publications
See all 145- 3D modelling of runaway electron deconfinement by MHD instabilities in ITER mitigated disruptions: from avalanche to termination Nov 18, 2026 · Nuclear Fusion
- Recent achievements at the ITER Neutral Beam Test Facility, and mission within the ITER research plan Nov 18, 2026 · Nuclear Fusion
- Outcomes of activation measurements and analyses of ITER materials during JET DTE3 operations Nov 17, 2026 · Plasma Physics and Controlled Fusion
- Thermomechanical low cycle fatigue assessment of the W-armoured ITER First Wall Panel Nov 10, 2026 · Fusion Engineering and Design
- Analysis of Solid Boron Injection for ITER Nov 8, 2026 · arXiv (physics.plasm-ph)
- A study of the influence of prolonged baking on deuterium depth distribution and release in JET ILW components Nov 6, 2026 · Nuclear Fusion
- Monte-Carlo simulation of prompt gamma-ray background in the ITER radial gamma-ray spectrometer Nov 5, 2026 · Fusion Engineering and Design
- Performance Validation of the First Unit of RF Solid-State Amplifiers for ITER HNB Nov 1, 2026 · IEEE Transactions on Plasma Science
- Design and Implementation of Slow Conventional Controller for the ITER MCTB Quench Protection System Oct 26, 2026 · Fusion Science and Technology
- Spatial variation and properties of boron layers formed by glow-discharge boronization in ASDEX Upgrade and WEST in support of ITER Oct 23, 2026 · Nuclear Materials and Energy